Error code
Coffee machine signal Error – Coffee Temperature / Steam Temperature
Dacor coffee machine — reported by blinking lights rather than by a code. One of the two genuinely serious messages on this platform, and the machine is right to stop.
- From $95 diagnostic, credited to the repair
- 59 cities and neighborhoods covered
- OEM parts available on order
- In writing the price, before anything is opened
What we can confirm
Code Error - Coffee Temperature / Steam Temperature, from the manufacturer's own documentation
A code is only meaningful together with the machine showing it — the same digits mean different things on different equipment.
The code
Error - Coffee Temperature / Steam Temperature
One of the two genuinely serious messages on this platform, and the machine is right to stop. Temperature control on an espresso machine is a heater, a sensor and a control agreeing with one another, and this message says they no longer do. It is not a maintenance prompt and it will not clear by cleaning. On a discontinued appliance the parts conversation comes before the labor one.
or call (305) 363-6067
What it narrows down to
A problem in temperature control on the coffee or the steam side. The buttons are disabled and the machine asks for service.
Diagnostic
From $95, credited to the repair
On the same appliance
What else belongs to the built-in coffee systems
On this make a code belongs to the appliance rather than to a product line. These are the other conditions this machine can display, and the models that can show this one — a display often has more than one thing to say, and the model number decides what any of it costs to put right.
Other codes this appliance can display
The used-grounds drawer is not seated properly, and the buttons are disabled until it is.
The front panel is not closed, and the machine has disabled its buttons.
Routine milk cleaning is due — it appears two hours after the milk system was last used.
Routine brew-group cleaning is due — every fifty cycles.
The machine has detected an operation problem in the named subsystem and disabled its buttons.
The machine could not fill its boiler in the expected time, and the buttons are disabled.
No water in the tank on a tank-fed machine, or the supply is not connected or turned on if plumbed.
Too much ground coffee in the chute, or the grind time is set too long.
The same digits mean different things on different equipment. Search the full code list
In more detail
About Coffee machine signal Error – Coffee Temperature / Steam Temperature
What the appliance is actually reporting
One of the two genuinely serious messages on this platform, and the machine is right to stop. Temperature control on an espresso machine is a heater, a sensor and a control agreeing with one another, and this message says they no longer do. It is not a maintenance prompt and it will not clear by cleaning. On a discontinued appliance the parts conversation comes before the labor one.
The other ways this one is printed
Error - Coffee Temperature / Steam Temperature · Error - Coffee Temperature · Error - Steam Temperature
The same condition is printed differently on different panels of the same make, and every spelling the maker publishes for it is above. Whichever of them you searched for, this is the right page.
Where this appears, and which table it belongs to
On the appliance's own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.
Which machines this one applies to
CM24P and CM24T built-in coffee systems. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 5 of the appliance types this site publishes — coffee machine, cooktop, dishwasher, oven and range — and publishes none at all for freezer, microwave, range hood, refrigerator and wine cooler. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.
What to do about it
- Note whether it names coffee or steam — they are separate circuits and separate parts.
- Power down for a minute; a single sensor reading error occasionally does not repeat.
- Do not keep using it if it clears and returns. A temperature control that is wrong is not safe to trust.
- Ask for parts availability before booking labor on this platform.
Where this goes next
The job this usually becomes is coffee system brew group service, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call (305) 363-6067 and describe what the panel is doing before booking anything.
This article is based on:
- Official manufacturer documentation
- Internal repair procedures
- Technician repair history
- Company quality standards