--- title: "Range error code F14" description: "Dacor range error code F14: The board that switches the loads has failed. Which machines can raise it, what the maker publishes about it, and what to do…" url: "https://dacormiami.support/error-codes/range-er-f14/" date_modified: "2026-09-12" Appliance type: "range" --- # Range error code F14 ### What F14 means on this make The board that switches the loads has failed. It is a different part from the control panel — the panel is what you press, the power board is what does the work — and on this platform they fail independently and are priced differently. The important practical point is that a power board can fail in a way that leaves an element energized, so a range showing this code and heating when it should not is switched off at the breaker rather than watched. ### Where this appears, and which table it belongs to On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all. ### Which machines this one applies to ER30D, ER36D and ER48D ranges. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 5 of the appliance types this site publishes — coffee machine, cooktop, dishwasher, oven and range — and publishes none at all for freezer, microwave, range hood, refrigerator and wine cooler. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door. ### What to do about it - If anything is heating with the range switched off, cut the breaker now. - Note whether the failure followed a power cut or a storm — this board takes surges. - The panel and the power board are tested separately; only one of them is usually at problem. - Availability is checked before the visit, as with every legacy board on this make. ### Where this goes next The job this usually becomes is [appliance control board repair](/services/appliance-control-board-repair/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-6067](tel:+13053636067) and describe what the panel is doing before booking anything. ER30D, ER36D and ER48D ranges What this one means What F14 means on this make The board that switches the loads has failed. It is a different part from the control panel — the panel is what you press, the power board is what does the work — and on this platform they fail independently and are priced differently. The important practical point is that a power board can fail in a way that leaves an element energized, so a range showing this code and heating when it should not is switched off at the breaker rather than watched. Where this appears, and which table it belongs to On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all. Which machines this one applies to ER30D, ER36D and ER48D ranges. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 5 of the appliance types this site publishes — coffee machine, cooktop, dishwasher, oven and range — and publishes none at all for freezer, microwave, range hood, refrigerator and wine cooler. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door. What to do about it If anything is heating with the range switched off, cut the breaker now. Note whether the failure followed a power cut or a storm — this board takes surges. The panel and the power board are tested separately; only one of them is usually at problem. Availability is checked before the visit, as with every legacy board on this make. Where this goes next The job this usually becomes is appliance control board repair, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-6067](tel:+13053636067) and describe what the panel is doing before booking anything. --- **[Read full article: Range error code F14](https://dacormiami.support/error-codes/range-er-f14/)**