---
title: "Oven error code C-F2"
description: "Dacor oven error code C-F2: The panel you press and the board that acts are no longer in contact."
url: "https://dacormiami.support/error-codes/oven-c-f2/"
date_modified: "2026-09-12"
Appliance type: "oven, range"
---


# Oven error code C-F2

### What C-F2 means on this make

The panel you press and the board that acts are no longer in contact. As with C-F0 the cable between them is the cheapest and likeliest cause, and it is checked first. What distinguishes this code in daily use is the symptom: the oven may be perfectly capable of heating and simply unable to be told to, which people describe as a dead oven when it is nothing of the sort.

### Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

### Which machines this one applies to

Modernist wall ovens and Pro ranges. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 5 of the appliance types this site publishes — coffee machine, cooktop, dishwasher, oven and range — and publishes none at all for freezer, microwave, range hood, refrigerator and wine cooler. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

### What to do about it

- Describe what the panel does — dark, lit but unresponsive, or responding intermittently.
- Power down for a minute and watch whether the panel comes back fully on restart.
- The ribbon between panel and board is inspected and measured before parts are named.
- An oven that heats but cannot be set is usually this, and it is not a heating repair.

### Where this goes next

The job this usually becomes is [appliance control board repair](/services/appliance-control-board-repair/), and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-6067](tel:+13053636067) and describe what the panel is doing before booking anything.

Modernist wall ovens and Pro ranges

What this one means

What C-F2 means on this make

The panel you press and the board that acts are no longer in contact. As with C-F0 the cable between them is the cheapest and likeliest cause, and it is checked first. What distinguishes this code in daily use is the symptom: the oven may be perfectly capable of heating and simply unable to be told to, which people describe as a dead oven when it is nothing of the sort.

Where this appears, and which table it belongs to

On the appliance’s own display. Photograph it before you cut the power: a display that has been cleared has taken the evidence with it, and there is no way to ask the machine for it again. Then check the model, because this make changed hands in 2016 and the two generations share no code string. The same characters mean different things on a Classic ERC oven, an ER-series range and a Modernist induction cooktop, and a meaning read off the wrong table is worse than no meaning at all.

Which machines this one applies to

Modernist wall ovens and Pro ranges. The same number on a different appliance of this make is a different page and often a different repair, which is why this archive is organized by appliance rather than by number. This maker documents codes on 5 of the appliance types this site publishes — coffee machine, cooktop, dishwasher, oven and range — and publishes none at all for freezer, microwave, range hood, refrigerator and wine cooler. Those appliances have symptom pages here and no code pages, which is the honest answer rather than borrowing a table from the machine next door.

What to do about it

Describe what the panel does — dark, lit but unresponsive, or responding intermittently.

Power down for a minute and watch whether the panel comes back fully on restart.

The ribbon between panel and board is inspected and measured before parts are named.

An oven that heats but cannot be set is usually this, and it is not a heating repair.

Where this goes next

The job this usually becomes is appliance control board repair, and that page carries a starting figure and the reasons that move it. If it turns out to be nothing — and on this make a real share of these are modes, reminders and settings rather than problems — the visit ends there and you pay the diagnostic and nothing else, or call [(305) 363-6067](tel:+13053636067) and describe what the panel is doing before booking anything.

---

**[Read full article: Oven error code C-F2](https://dacormiami.support/error-codes/oven-c-f2/)**